Operation Example 3; Operation Example 4 - Mitsubishi Electric DX-TL5000E Installer Manual

Operation examples (continued)

Operation example 4

Setting the timer recording operation (2). Switching the
number of the cameras operated and recording rate
depending on the time period and day of the week. Also
switching the motion detection condition depending on the
time period (daytime and night) or day of the week.
Operation
• Uses <Set Recording Pattern A> (alarm recording
operation: Motion detection A) from 08:00 to 18:00
on Monday to Friday.
• Uses <Set Recording Pattern B> (alarm recording
operation: Motion detection B) from 18:00 to 08:00
on Monday to Friday.
• Uses <Set Recording Pattern B> from 08:00 to 08:00
(on the following day) on Saturday and Sunday.
08:00
From Monday
<Recording Pattern A>
to Friday
(Motion A)
08:00
Saturday and
Sunday
Settings
<Recording settings (Set Recording Pattern A)> (
see pages 46 to 48)
Setup Menu
1 Recording
1 Set Recording Pattern A
Camera Check
1
Normal Recording Menu
2
D
Alarm Recording Menu
3
D
Alarm Trigger In/Out
5
1. Execute camera check to detect the cameras with
step
video signal input automatically.
2. Use "Easy" to set the desired recording rate for
step
normal recording.
3. Use "Easy" to set the desired recording rate for alarm
step
recording.
4. Set the alarm recording trigger to "MD-A."
step
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
86
18:00 08:00 (next day)
<Recording
Pattern B>
(Motion B)
08:00 (next day)
<Recording Pattern B>
(Motion B)
Recording Setting A-Normal (Easy)
Recording Setting A-Alarm (Easy)
<Recording settings (Set Recording Pattern B)> (
see pages 46 to 48)
Setup Menu
1 Recording
2 Set Recording Pattern B
Camera Check
1
Normal Recording Menu
2
D
Alarm Recording Menu
3
D
Alarm Trigger In/Out
5
5. Execute camera check to detect the cameras with
step
video signal input automatically.
6. Use "Easy" to set the desired recording rate for
step
normal recording.
7. Use "Easy" to set the desired recording rate for alarm
step
recording.
8. Set the alarm recording trigger to "MD-B."
step
<Motion detection settings> (
Setup Menu
1
step
3 Motion Det
Set Motion Detection Pattern A
1
2
step
A+12
13 Test Mode
3
step
Set Motion Detection Pattern B
2
4
step
A+12
Test Mode
13
9. Set the motion detection settings for Motion A and
step
Motion B.
Recording Setting B-Normal (Easy)
Recording Setting B-Alarm (Easy)
see pages 53 and 54)
Motion Mask Settings
Motion Mask Settings
5
step
6
step
7
step
8
step
9
step