Cleaning The Oven Door - AEG BE5003021 User Manual

2. Hold the heating element with two
hands at the front.

10.4 Cleaning the oven door

Removing the door and the glass panels
You can remove the oven door and the
internal glass panels to clean it. The
number of glass panels is different for
different models.
WARNING!
Be careful when you remove the
door from the appliance. The
door is heavy.
A
2
B
3.
4.
Installing the heating element
1.
2.
1.
2.
3.
A
4.
5.
6.
7.
1
Pull it forwards against the spring
pressure and out along the supports
on the two sides.
The heating element folds down.
You can clean the oven ceiling.
Install the heating element in the
opposite sequence.
Install the heating element cor-
rectly above the supports on the
inner walls of the appliance.
Install the shelf supports.
Open the door fully.
Fully press the clamping levers (A)
on the two door hinges.
Close the oven door to the first
opening position (approximately 70°
angle).
Hold the door with one hand on
each side and pull it away from the
appliance at an up angle.
Put the door with the outer side
down on a soft cloth on a stable sur-
face. This is to prevent scratches.
Hold the door trim (B) on the top
edge of the door at the two sides
and push inwards to release the clip
seal.
Pull the door trim to the front to re-
move it.
ENGLISH
27