Conducting Calls With The Headset; Corded Headset; Cordless Headset - Siemens HiPath 3000 Operating Manual

Step by Step
Note:
If you wish to replace the handset in the charg-
ing shell during a call, forexample, because the
battery pack is flat, hold down the Speaker-
phone key to prevent the call from being cleared
down.
Setting the speakerphone volume
The volume can be set during a call (

Conducting calls with the headset

The handset can be used with a corded and cordless
headset.

Corded headset

You can connect a corded headset via the jack on the
underside of the handset. The headset must have a
Slim Lumberg connector.
The receiver inset and microphone functions are activat-
ed on the headset once it is connected.
Danger:
The use of wired headsets is prohibited in poten-
tially explosive atmospheres.

Cordless headset

You can use a cordless, Bluetooth headset with your
handset. This means your hands are free while making
calls, and there are no annoying cables, forexample,
when you are working at your computer or when you
are on the road.
Danger:
Only BT headsets with the appropriate Ex protec-
tion rating are permitted in potentially explosive
atmospheres.
Conducting calls – enhanced functions
Page 25).
43