Siemens HiPath 3000 Operating Manual page 54

Conducting calls – enhanced functions
Step by Step
ý
st
Data Transfer
st
Bluetooth
st
Search Headset
st
Found Devices
S55 Headset
st
Trust Device
st
agreed PIN:
Õ
st
Activation
44
Your Bluetooth headset must be registered on your
handset before you can use it for the first time. After
this, you can continue to use your Bluetooth headset
until you decide to de-register it.
Note:
•
•
You can use voice dialling to initiate a call from your
Bluetooth headset.
During a call, a second caller is not signalled at the Blue-
tooth headset.
Registering a Bluetooth headset at the handset
Set the headset to login mode (see the user manual
supplied with your headset).
©
Open the handset's main menu.
[
Select the menu icon and confirm.
[
Select the menu item and confirm. The Bluetooth menu
is displayed.
[
Select the menu item and confirm. The handset search-
es for a Bluetooth headset and sets up a wireless con-
nection. The name of the devices found are displayed.
Note: This function is not available in monitoring mode.
Select the required headset.
Options Open the handset's menu
[
Select the menu item and confirm.
[
Enter and confirm the Bluetooth PIN for your headset
(see the user manual supplied with your headset). The
device is recorded in the list of known devices.
[
The Bluetooth interface is automatically activated on
your handset.
The active Bluetooth function is ticked.
Theoretically, third parties can tap Bluetooth
connections.
To improve protection against unauthorised
tapping, de-register any Bluetooth devices
you no longer require.