Login The Setting Page Of The Projector; Enter The Ip Address; Select A Display Mode And Login - Sanyo PLV-80 Series Owner's Manual

Chapter 3 Basic Setting and Operation

Login the setting page of the projector

1

Enter the IP address

Launch the web browser installed in your
computer, enter the IP address into the
"Address" on the browser and then press
"Enter" key.
Enter the address (192.168.1.201) that you
configured in item "Network configura-
tion" (+ p.20). The default IP address is [192.168.0.2].
2

Select a display mode and login

This product provides 2 types of control mode, Standard Mode and Light Mode as the
below. Select a proper mode to match your PC and network environment by clicking
If the setting page has set the password, the
authentication window will appear. In this case type
"user" onto the User Name text area and the login
Network PIN code onto the Password text area and
then click Ok button.
* The entering User Name must be "user" and it can not be
changed.
[Note]
When accessing the projector for the first time or the
Network PIN code "0000" is set, the auto-login will be per-
formed and the next main setting page is displayed.

on the text link.
STANDARD MODE For computer display, displays
graphical menus and settings. This
mode is recommended for standard
use.
LIGHT MODE
Displays with 200 x 300 dots. This
mode is optimized for use of the
handheld computer, PDA, etc. It is
also convenient if the network traf-
fic is heavy. (This mode has some
limitations on the multi-control
function.)