Network Pin Code Setting; Pjlink And Password Setting - Sanyo PLV-80 Series Owner's Manual

Network PIN code setting

This is to set the Network PIN code to restrict the access from
an unauthorized person through the network.
Enter a 4-digit number as the Network PIN code onto the text
box and click Set button.
The network unit begins restarting and it takes about 20 sec-
onds. Close (Quit) the web browser and access to the login
page again in 20 seconds. This is to perform the login authentication firmly.
The default Network PIN code [0000] means no Network PIN code is set.
When you connect the projector with this product to the network, it is recommended to set a
✐
new Network PIN code. Only a four-digit number is valid for the Network PIN code.
If you forget the Network PIN code to the projector, you can check it by selecting "Network PIN
✐
code" sub menu from "Network" menu on the projector. For further information, please see item
"Network PIN code setting" (+p. 22).

PJLink and password setting

This is to set the PJLink password authentication on or off. If set
"On" with the PJLink pull-down menu, the password must be
required. Enter a password* onto the text box and click Set
button.
1 to 32 alphanumeric characters can be used for the password.
✐
What's PJLink?
The projectors equipped with PJLink function can be used together on the same network,
regardless of model or brand, for centralized control and monitoring. This standard was
established by the Japan Business Machine and Information System Industries Association
(JBMIA).
PJ-NET ORGANIZER
OWNER'S MANUAL [PLV-80/75 Series]
Initial setting
1