DSL-G604T Generation II ADSL2+ Wireless Modem Router
Follow the instructions below according to which of the above DHCP options you want to use. When you have
configured the DHCP Settings as you want them, click the Apply button to commit the new settings.
Use the Router for DHCP
To use the built-in DHCP server, click to select the DHCP Server option if it is not already selected. The IP
Address Pool settings can be adjusted. The Starting IP Address is the lowest available IP address (default =
10.1.1.2). If you change the IP address of the Router this will change automatically to be 1 more that the IP
address of the Router.
The Ending IP Address is the highest IP address number in the pool. Type in the Lease Time in the entry
field provided. This is the amount of time in seconds that a workstation is allowed to reserve an IP address in
the pool if the workstation is disconnected from the network or powered off.
Disable the DHCP Server
To disable DHCP, click to select the No DHCP option and click on the Apply button. Choosing this option
requires that workstations on the local network must be configured manually or use another DHCP server to
obtain IP settings.
If you configure IP settings manually, make sure to use IP addresses in the subnet of the Router. You will need
to use the Router's IP address as the Default Gateway for the workstation in order to provide Internet access.
DHCP Settings window with DHCP disabled
Page 49 of 110
www.dlink.com.au