DSL-G604T Generation II ADSL2+ Wireless Modem Router
If you select User Define in the Classified by drop-down menu, the following window appears.
QoS Configuration window IP QoS for User Define
On this window, you can assign a weight, on a percentage basis, to each of the four priority queues. In
addition, you can specify the number of bytes from the beginning of a given packet's IP header to set a pointer.
From this pointer, you can then specify a Value (in hexadecimal) and a Mask (in hexadecimal) for the router to
match when examining packets crossing the specified priority queue. It is recommended that you not enter a
QoS scheme of this type unless you fully understand Offsets, pointers, masks, and IP headers or you are
instructed to do so by your ISP.
Page 79 of 110
www.dlink.com.au