A discharge of static electricity can damage static-sensitive devices or micro circuitry. Proper packaging and grounding techniques are necessary precautions to prevent damage. CAUTION FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
The tape library is damaged because of improper packaging on return. • Unauthorized modifications to the unit configuration by the customer may result in loss of guarantee by the vendor. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
In multiple-rack installations, secure racks together. • • Extend only one rack component at a time. Racks may become unstable if more than one component is extended. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Packing in as many or more cartridges in the standard rack height 1U as most other Libraries on the market Maximum up time • Through advanced error handling and recovery capability FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Page 13
Not all features will be available at initial product launch and will be added upon technology availability, anticipated market requirements, and/or customer needs. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Front panel "OCP" display, consisting of 2x16 characters. The OCP screen displays actions and status information, menu items or error messages equivalent to the operation mode. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
"Chapter 6 Packaging before Transportation" (page 85)) Tape Drive LED Ethernet port Serial port Controller LED USB port (Host) SAS connector Fibre Channel connector FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Minimum of 30.8 cm (12 inches)-for mailslot Minimum of 60 cm to remove magazines (24 inches) Sides Minimum of 5.08 cm (2 inches) FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Do not place the library on either end or sides as this may damage the library. CAUTION After unpacking the library, save all the original packing materials in case you need to ship or move the library later. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Remove the yellow label that is securing the lock to the top of the library, and then remove the lock (see Figure 2.2). Figure 2.2 Removing shipping lock and label Figure 7: Removing shipping lock and label FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Before performing any installation or maintenance procedures, be sure that the library power switch is in the off position and that the power cord is disconnected CAUTION from the library and the outlet. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Phillips screwdriver in the 4. hole. The library easily installs into a standard 19" rack system taking up 1U of space. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
2.5 Rack Mounting the Tape Library Procedure If you use a Fujitsu Technology Solutions PRIMECENTER rack you first have to mount the support bracket in the appropriate height to the - seen from the front of the rack - left rear rack post as shown below.
The rail now is positioned between the two rack posts by its spring pressure. Support the rail with one hand. Figure 2.7 Setting in the right rail at the front FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Then fasten the rail on the rear side with two screws with centering washers as shown below. Figure 2.9 Mounted right sliding rail (rear side) FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Put the ETERNUS LT20 S2 from the front of the rack on the support angles of the sliding rails and push it into the rack to the back stop. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED...
Screw on the ETERNUS LT20 S2 at the front to the inserted cage nuts as shown below. Figure 2.12 Screwing on ETERNUS LT20 S2 End of procedure FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
HBA, library and your server. ■ Cable Fujitsu recommends a maximum SAS cable length of 4 meters from HBA to one tape drive. CAUTION Do not use any adapter or converter between HBA and tape drive(s).
Fibre Channel configuration to the FC HBA, an FC hub, an FC device with two I/O ports or an FC switch. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
System → Hardware → Device Manager → Tape Drive Media Changer. and/or For more information on verifying the connection of devices, consult the operating system documentation. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Home Screen. Numeric error codes are only used for unrecoverable, fatal errors, otherwise text status messages are • provided. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
If a library failure occurs, the Ready/Activity LED will be turned off and the Error LED will be illuminated. The OCP will also display an appropriate error code to help identify the failure. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED...
The library controller switches off the power supply's secondary side. To abort the shutdown process the user has to press Cancel within the first 3 seconds. • FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Vendor ID ..Magazines Product ID ..Config Serial No ..SCSI ID ..(SCSI only) Drive Barcode WWNN ..(FC only) Reporting FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Place identification labels only in the designated area on the cartridge. • FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Figure 3.3 Ultrium tape cartridge and proper barcode label placement • You may order tape cartridges, barcode labels, and other accessories via your Fujitsu sales representative. It is recommended to order accessories classified by Fujitsu as "Preferred Quality" exclusively. Only such tape cartridges have the full support by Fujitsu.
The barcode reader provides inventory feedback to the host application and/or LCD screen by reading the cartridge barcode labels. The library stores the customized inventory data in memory. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED...
If there is more than one cleaning cartridge available, the one with highest load count will be used. This causes the cleaning cartridge with the highest load count to wear out first. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED...
Insert cartridges in the magazines Put the full magazines back to the tape library (see Figure 3.5) Figure 3.5 Insert magazines End of procedure FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
The magazine will lock into place once it is correctly installed and the library will inventory the magazine. End of procedure FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Figure 3.7 Operations, Magazine page Release Press the button. Remove the magazine from the unit. End of procedure FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
The red X Status Error indicates that user intervention is required and that the library is not capable of performing operations. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Each level affects which areas you have access to and what actions you can initiate from those areas. Figure 3.11 RMU Login page FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
This page provides detailed information about the drive. No changes can be made from this page. You can Identity → Drive reach this page by selecting Figure 3.13 Identity, Drive page (SAS) FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
This page provides detailed information about the network. No changes can be made from this page. You can Identity → Network reach this page by selecting Figure 3.15 Identity, Network page FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
• Internal Temperature • • Media Removal (allowed or prevented, from on library firmware version 1.90) • Magazines Figure 3.16 Status, Library page FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
To get detailed information, click on the + button. This will expand the display for the specified magazine, specifying the barcodes and types of the cartridges: FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED...
The user is also able to select which activates the drive. You can reach this page by Configuration → Drive selecting Figure 3.21 Configuration, Drive page (SAS) FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Figure 3.24 Certificate generation Reply field Meaning The certificate is generated and installed You exit the procedure Display certificate The certificate obtained is displayed FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
This screen is displayed for selection item 3: Figure 3.25 Certificate information The following screen appears when you install the certificate: Figure 3.26 Certificate import wizard: Welcome FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Internet Options → Extended , uncheck the box for showing warnings if the certificate address does not match and click Figure 3.31 Unchecking the warnings box FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
The password for accessing the OCP when the OCP Access PIN is enabled Repeat OCP Access PIN Code • Enter the OCP Access PIN Code again FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
This shows current time zone selected. Select the zone for your location from the pull down list. • Enable Daylight Savings Adjustment Help Enabling Daylight Savings will advance the local time by one hour. Click for further information. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
"3.4.3 Login" (page 46)). Figure 3.35 Configuration, Log page The trace level and trace filter selection options can be set by service personnel. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
This page allows the user to reset the configuration to the factory defaults. You can reach this page by Configuration → Restore Defaults selecting Figure 3.37 Configuration, Restore Defaults page FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
This page provides the user with a means to re-scan the library to determine the current media inventory. You Operations → Inventory can reach this page by selecting Figure 3.39 Operations, Inventory page FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Operator Control Panel or the Remote Management Unit. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
The user selects the drive test type. A Drive Support Ticket can be created and downloaded which can support service engineers solving drive and media problems. Figure 3.42 Service, Drive Diagnostic page FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Selecting this page allows the user gets information on all cartridges in the library and all specific values the Service → Cartridge memory library handles for each cartridge. You can reach this page by selecting Figure 3.47 Service, Cartridge Memory page FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Many backup applications use their own drivers for the library and drive. Before installing a driver, make sure it will not be in conflict with the software. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED...
• Contact your service representative. Tape stuck in storage slot "4.3 Removing Stuck Tapes from Slots" (page 72). FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Page 70
There is an error code on the LCD Look up the error code, try to resolve the failure, and power cycle (see "4.6 Tape Library Error Codes" (page 76)). FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Page 71
Firmware Upgrade Cartridge. • Any cartridge that is suspected of being defective or contaminated should NOT be reused in any drive. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
During this process any burr on the cartridges will be removed. Insert cartridge in the magazine. Put the magazine back to the tape library. End of procedure FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Find the access holes for the right and left magazines (see Figure 4.2). Figure 4.2 Access holes for the left and right magazine Description Right magazine release Left magazine release FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
If there are additional tapes still in the library, or if you were unable to manually remove the magazines and drive, please contact service for further instructions. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED...
Media Removal (SAS or FC) is disconnected, you have to reboot the library. After reboot the is reset to Allowed FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Reset the unit and retry operation. After several occurrences contact technical support Setting of elevator motor parameters failed Reset the unit and retry operation. After several occurrences contact technical support FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Page 77
Run 'library Health Check', after several occurrences contact technical support Elevator range out of specification Run 'library Health Check', after several occurrences contact technical support FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Page 78
Check barcode on scratch cartridge and run 'library different barcode data for the same cartridge Health Check' again. If the error recurs, contact label technical support FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Page 79
Drive Unload Timeout Retry operation; if not successful contact technical Drive has run in a timeout while unloading a support tape FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Make sure you are always properly grounded when touching a static-sensitive component or assembly. • • Avoid touching pins, leads, or circuitry. • Use conductive field service tools. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Pull straight back on the tape drive handle to remove it from the library. Take care to slightly push down the product ID slide so it does not interfere with the drive sled (see Figure 5.2). FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Connecting the power cable and terminator. Power on the library using the power button on the front panel. Run the library Verify test. End of procedure FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Plug in the power cord and host interface cable (and the terminator, if required) into the replacement library enclosure. Power on the library. Run the library Verify test (see "3.4.8.1 Performing General Library Diagnostics" (page 64)). FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Securely package the library enclosure that was replaced, and return to repair center (see "Chapter 6 Packaging before Transportation" (page 85)). End of procedure FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Store the lock and the label on the top cover. The shipping lock prevents the robot mechanism from moving during shipment. Figure 6.1 Replacing Shipping lock before transportation FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Figure 6.2 Product Label Package the tape library. Please use the original box or the box in which you received the spare library (see Figure 6.3). FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Send the library to the service center. Figure 6.3 Re-packing the library Description Bottom shell ETERNUS LT20 S2 unit Top shell parts End of procedure FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
You find the technical data of the library, the types of drives you can use and their performance characteristics in the "DATASHEET ETERNUS LT20 S2" which is available at http://www.fujitsu.com/global/services/computing/storage/eternus/products/tape/lt20-s2/ FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Plug the computer and its peripherals into a different branch circuit from that used by the affected device. • • If necessary, consult an experienced radio/television technician for additional suggestions. FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Chapter 9 Regulatory Information 9.3 Canadian Certification Canadian Certification This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations (ICES-003, Class A). FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0...
Page 94
However, Fujitsu shall assume no responsibility for any operational problems as the result of errors, omissions, or the use of information in this manual. • Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information in this manual.