Operation Examples; Operation Example 1 - Mitsubishi Electric DX-TL5000U Installer Manual

Operation examples

Operation example 1

Specifying the recording period and performing continu-
ous repeat recording.
• For loading of a picture supplied from the camera,
see "Relation of recording operation to the number
of cameras and recording rate settings" on page 137.
Operation
• Continues recording for 24 hours and repeats
recording on a one-month (30-day) cycle.
• Makes the backup of the data simultaneously during
recording.
Settings
<Recording settings> (
Setup Menu
1 Recording
1 Set Recording Pattern A (Normal/Timer)
Camera Check
1
Normal Recording Menu
2
D
1. Execute camera check to automatically detect the
step
cameras with video signal input.
2. Use "Auto" to set "30 Day" and "24 hours" for
step
"Recording cycle" and "Recording time per day"
respectively.
<Copy device settings> (
System Menu
5 Memory
1 Add/Remove HDD Device
2 External HDD (USB HDD)
3. Register the multiple HDDs for SerialBus group of
step
Copy 2.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
90
see pages 51 to 53)
Recording Setting A-Normal (Auto)
see pages 80 and 81)
<Backup settings> (
User Menu
2 Copy
Copy Data to Copy 2 Drive
2
Set Copy 2 Drive
4
4. Set "To Copy 2" to "SerialBus," "FIFO Overwrite" to
step
"On," and "Overwrite" to "Off."
5. Set "Range of Copy" to "Continue."
step
6. Select "Execute."
step
• When setting the total capacity of the copy 2 device
(registering the device) to larger than that of the main
device, all the recorded data of the main device can
be copied to the copy 2 device. In this operation
example, the recorded data of more than one month
in the main device can be stored to the copy 2 device.
1
step
You can prevent the accidental erasure of the
recorded data caused by the crash of the main device.
2
step
3
step
see pages 44 and 45)
steps
4
step
5, 6