Call Forward Procedures - Toshiba Strata CIX User Manual

Advanced Operation
Call Forward

Call Forward Procedures

The following table contains Call Forward Button sequences. You can do a Call
Forward function by one, entering the button sequence as described, or two,
programming a flexible button to perform the sequence. See
Procedure" on page 12
Some Call Forward features require a Pass Code entry. Use the following procedure to
change your Pass Code.
ä
To change your Pass Code
ä
Lift the handset, press
Pass Code (1~15 digits) +
ä
To use the Call Forward button sequence
ä
Follow the instructions in the following table, shown under "Button Sequence."
Some features require additional input, such as:
• Destination – If the destination is an outside number, press
destination. The CIX accepts destination numbers of up to 32 digits.
• Timer – This is a two digit entry representing how long (8 to 160 seconds) your
telephone should ring before forwarding the call. If you enter one digit, you
must press
• Pass Code – A four-digit code established by system programming to prevent
unauthorized changes. The code applies to the station to be forwarded; not to
the station entering the code.
Note In the following table, (Tone) means that a confirmation tone will play at that
point in the sequence.
Table 1 Call Forward Procedure
Feature
Call Forward Any Call (Internal and Incoming Line)
All Calls
Busy
No Answer
Busy No Answer
Cancel
12
for instructions on programming a flexible button.
#670
+ ext. no. + old Pass Code (1~15 digits) +
#
.
#
after entering the single digit.
#6011
Lift handset, press
#6021
Lift handset, press
#6031
Lift handset, press
#6041
Lift handset, press
#6051
Lift handset, press
Button Sequence
(Tone) + Destination No. +
#
(Tone) + Dest. No. + (Tone)
#
(Tone) + Dest. No. + (Tone) + Timer +
#
+ Dest. No. + + Timer +
(Tone)
Strata CIX Standard Telephone
"Call Forward
#
+ new
#
after entering the
#
(Tone)
#
#
02/06