Advertisement
4. Connecting to a Windows NT Server 4.0
Windows for
Requirements
Workgroups
• HP Vectra VE7/VE8 with DOS and MS-Windows for Workgroups 3.11 in-
Ver. 3.11
• 3COM Token Ring 3C339 card and drivers disk ver. 5.0.
• DOS and MS-Windows for Workgroups 3.11 media.
• Microsoft Windows NT Server 4.0 machine that supports Net BEUI,
Device Configuration
• I/O Base Address
• Interrupt Request Level
Procedure
1 With the HP Vectra VE7/VE8 set to PNP enabled, turn the machine off
2 Power on the machine and allow it to boot to a DOS prompt.
3 Insert the 3COM drivers diskette (ver. 5.0) and execute 3C3x9CFG.EXE.
4 Select "CONFIGURE NIC," and verify the resource settings listed above
5 If changes are required, save those changes and exit.
6 Remove the 3COM cards driver diskette and insert Netware client for DOS
7 Execute INSTALL.EXE.
8 Specify the settings as listed below:
stalled.
DOS ODI - File Name: Tl3c3x9.dos Size: 52KB Date: 2/28/97
NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
install the 3COM 3C339 TR adapter card into a PCI slot.
under the heading "Device Configuration."
and MS-Windows disk 1.
C:\NWCLIENT
Yes
Yes
4. Connecting to a Windows NT Server 4.0
Windows for Workgroups Ver. 3.11
DC00
10
Advertisement
