Advertisement
Windows 95 SR2
Requirements
• HP Vectra VE7/VE8 with Windows 95 SR2 installed.
• 3COM 3C 339 Token Ringcard and drivers disk
• Windows 95 SR2 media.
• Novell Netrware 4.11 server that supports Net BEUI, NWLink IPX/SPX,
Device Configuration
• I/O Base Address
• Interrupt Request Level
• Boot PROM
• Transceiver Type
• Network Driver Optimization
•
• Full Duplex
Procedure
1 With the HP VE7/VE8 turned off install the 3COM 3C339 adapter card into
2 Power on the machine and restart Windows 95 SR2 in MS-DOS Mode.
3 Insert the 3COM drivers diskette (downloaded from 3COM's website) and
4 Select "CONFIGURE NIC," and verify the resource settings listed above
5 If changes are required, save those changes and exit.
6 Remove the 3COM cards driver diskette and restart the machine.
7 After Windows loads, click on "Start," to "Settings" and over to "Control
8 Double click on "Network" and select "Add."
9 Choose to add an adapter, click on "Add" then on "Have Disk."
and
NWLink NetBIOS transfer protocols.
Plug and Play Compatibility
an PCI slot.
execute 3C3X9CFG.EXE.
under the heading "Device Configuration."
Panel."
2 Connecting to a Netware 4.11 Server
DC00
10
Disabled
Auto Select
Windows or OS/2 Client
Disabled
Disabled
Windows 95 SR2
Advertisement
