Advertisement
Quick Links
Advertisement
Related Manuals for HP 3C509B ISA
Summary of Contents for HP 3C509B ISA
- Page 1 3COM Etherlink III 3C509B ISA 10BT Network Adapter Installation Guide...
- Page 2 Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
- Page 3 General information to read before installing General information to read before installing • On all systems : Before installing LAN card, go into Bios setup and set PnP OS field to NO. • How to change LAN card configuration if needed (Advanced users only) This is a general advisory on how to forcibly modify resources for ISA and PCI network cards.
- Page 4 General information to read before installing 2 Press F2 to go to CMOS setup. 3 Set PNP OS to NO and reserve IRQ 5. 4 Save settings and boot to applicable OS.
- Page 5 1 Power on the system and start Windows 95SR2.5. 2 From the 3COM 3C509B driver disk, run PREINSTL.EXE. 3 Shutdown and power down the system. With the HP Vectra turned off, install the 3COM 3C509B network adapter into an ISA slot.
- Page 6 21 When prompted, specify the path to your Windows 95 files. 22 Click on “Yes” when prompted to restart the system. 1 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Client for Microsoft Networks 3Com EtherLink III ISA (3C509b-TPO) in PnP mode...
- Page 7 1 Power on the system and start Windows 95SR2.5. 2 From the 3COM 3C509B driver disk, run PREINSTL.EXE. 3 Shutdown and power down the system. With the HP Vectra turned off, install the 3COM 3C509B network adapter into an ISA slot.
- Page 8 2 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter 10 Windows 95SR2.5 will automatically recognize the 3COM 3C509B network adapter as “3Com 3C509B EtherLink III”. 11 Insert the 3COM 3C509B driver disk in the floppy drive and click on “Next”...
- Page 9 1 Power on the system and start Windows 95SR2.5. 2 From the 3COM 3C509B driver disk, run PREINSTL.EXE. 3 Shutdown and power down the system. With the HP Vectra turned off, install the 3COM 3C509B network adapter into an ISA slot.
- Page 10 25 Accept the default Network Protocols and the Primary Network Logon to (Novell NetWare Client) as seen below and click on “OK”. (If you do not have the required information, contact your network administrator) 3 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a NetWare 3.12 Server...
- Page 11 3 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a NetWare 3.12 Server 26 Novell NetWare Client Novell NetWare Client 3COM Etherlink III Bus-Master PCI Ethernet Adapter IPX 32-bit Protocol for the Novell NetWare Client IPX/SPX-compatible Protocol NetBEUI 27 When prompted, specify the path to your Windows 95 files.
- Page 12 1 Power on the system and start Windows 95SR2.5. 2 From the 3COM 3C509B driver disk, run PREINSTL.EXE. 3 Shutdown and power down the system. With the HP Vectra turned off, install the 3COM 3C509B network adapter into an ISA slot.
- Page 13 25 Accept the default Network Protocols and the Primary Network Logon to (Novell NetWare Client) as seen below and click on “OK”. (If you do not have the required information, contact your network administrator). 4 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a NetWare 4.11 Server...
- Page 14 4 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a NetWare 4.11 Server 26 Novell NetWare Client Novell NetWare Client 3COM Etherlink III Bus-Master PCI Ethernet Adapter IPX 32-bit Protocol for the Novell NetWare Client IPX/SPX-compatible Protocol NetBEUI 27 When prompted, specify the path to your Windows 95 files.
- Page 15 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the 3COM 3C509B network adapter into an ISA slot. 2 Connect network cable media to the 3COM 3C509B network adapter. 3 Power on the machine and boot to a DOS bootable disk.
- Page 16 5 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter 8 Log onto Windows NT4 Workstation with administrator privileges (Contact your network administrator if you do not have the required information). 9 Right-click on the “Network Neighborhood” icon and select “Properties”.
- Page 17 5 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a Windows NT 3.51 Server 26 Specify your Computer Name, Workgroup or Domain (Contact your network administrator if you do not have the required information) and click on “Next”.
- Page 18 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the 3COM 3C509B network adapter into an ISA slot. 2 Connect network cable media to the 3COM 3C509B network adapter. 3 Power on the machine and boot to a DOS bootable disk.
- Page 19 6 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter 8 Log onto Windows NT4 Workstation with administrator privileges (Contact your network administrator if you do not have the required information). 9 Right-click on the “Network Neighborhood” icon and select “Properties”.
- Page 20 6 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a Windows NT 4.0 Server 26 Specify your Computer Name, Workgroup or Domain (Contact your network administrator if you do not have the required information) and click on “Next”.
- Page 21 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the 3COM 3C509B network adapter into an ISA slot. 2 Connect network cable media to the 3COM 3C509B network adapter. 3 Power on the machine and boot to a DOS bootable disk.
- Page 22 7 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter 8 Log onto Windows NT4 Workstation with administrator privileges (Contact your network administrator if you do not have the required information). 9 Right-click on the “Network Neighborhood” icon and select “Properties”.
- Page 23 7 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a Novell NetWare 3.12 Server 26 Specify your Computer Name, Workgroup or Domain (Contact your network administrator if you do not have the required information) and click on “Next”.
- Page 24 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the 3COM 3C509B network adapter into an ISA slot. 2 Connect network cable media to the 3COM 3C509B network adapter. 3 Power on the machine and boot to a DOS bootable disk.
- Page 25 8 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter 8 Log onto Windows NT4 Workstation with administrator privileges (Contact your network administrator if you do not have the required information). 9 Right-click on the “Network Neighborhood” icon and select “Properties”.
- Page 26 8 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a Novell NetWare 4.11 Server 26 Specify your Computer Name, Workgroup or Domain (Contact your network administrator if you do not have the required information) and click on “Next”.
- Page 27 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the 3COM 3C509B network adapter into an ISA slot. 2 Connect network cable media to the 3COM 3C509B network adapter. 3 Power on the machine and boot to a DOS bootable disk.
- Page 28 9 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter 8 Log onto Windows NT3.51 Workstation with administrator privileges (Contact your network administrator if you do not have the required information). 9 Open the “Network” icon in the “Control Panel” program group.
- Page 29 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the 3COM 3C509B network adapter into an ISA slot. 2 Connect network cable media to the 3COM 3C509B network adapter. 3 Power on the machine and boot to a DOS bootable disk.
- Page 30 10 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter 8 Log onto Windows NT3.51 Workstation with administrator privileges (Contact your network administrator if you do not have the required information). 9 Open the “Network” icon in the “Control Panel” program group.
- Page 31 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the 3COM 3C509B network adapter into an ISA slot. 2 Connect network cable media to the 3COM 3C509B network adapter. 3 Power on the machine and boot to a DOS bootable disk.
- Page 32 11 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter 8 Log onto Windows NT3.51 Workstation with administrator privileges (Contact your network administrator if you do not have the required information). 9 Open the “Network” icon in the “Control Panel” program group.
- Page 33 11 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a Novell NetWare 4.11 Server 26 Click on the “Reboot” button to restart the machine for the changes to take effect. 27 Install the Windows NT3.51 Service Pack 5 application.
- Page 34 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the 3COM 3C509B network adapter into an ISA slot. 2 Connect network cable media to the 3COM 3C509B network adapter. 3 Power on the system and boot to MS-DOS.
- Page 35 12 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter 10 Click on the “Install Microsoft Windows Network:” option, and click “OK”. 11 Click on the “Drivers” button from the “Network Setup” dialog box, and click on “Add Adapter”.
- Page 36 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the 3COM 3C509B network adapter into an ISA slot. 2 Connect network cable media to the 3COM 3C509B network adapter. 3 Power on the system and boot to MS-DOS.
- Page 37 13 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter 9 Select option 5 “Select the driver for your network board” and press “Enter”. 10 Select “OTHER DRIVERS”from the Network Board selection. 11 Insert the 3COM 3C509B driver disk into the floppy drive.