Advertisement
Windows 95 SR2
Requirements
• HP Vectra with Windows 95 SR2 installed.
• 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0.
• Vectra VL7 Driver Name: Elnk.VXD Size: 30KB Date: 7/18/96
• Windows 95 SR2 media.
• Novell Netrware 4.11 server that supports Net BEUI, NWLink IPX/SPX,
Device Configuration
I/O Base Address
Interrupt Request
• Boot PROM
• Transceiver Type
• Network Driver Optimization
• Maximum Modem Speed
• Plug and Play Compatibility
• Full Duplex
Procedure
1 With the HP Vectra turned off install the 3COM Etherlink III 3C509-B
2 Power on the machine and restart Windows 95 SR2 in MS-DOS Mode.
3 Insert the 3COM drivers diskette (ver. 5.0 downloaded from 3COM's
4 Select "CONFIGURE NIC," and verify the resource settings listed above
5 If changes are required, save those changes and exit.
Vectra VL8 and VE7/VE8 Driver Name : W95EL5X9.INF Size: 16KB
Date: 6/11/97
and NWLink NetBIOS transfer protocols.
Vectra VL8
210
10
Level
adapter card into an ISA slot.
website) and execute 3C5X9CFG.EXE.
under the heading "Device Configuration."
2 Connecting to a Netware 4.11 Server
Vectra VL7
Vectra VE7/VE8
210
300
10
10
Disabled
Auto Select
Windows or OS/2 Client
9600 Bps
Disabled
Disabled
Windows 95 SR2
Advertisement
