Advertisement
BROADCAST TYPE (STEREO/SAP/MONO) Multichannel Television Sound (MTS) carries stereo and/or Second Audio Program (SAP) bilingual signals. Set
this display to the desired position when both MTS stereo and SAP signals are received. When only one of the MTS signal is received, the DVD+VCR
automatically selects the corresponding receiving mode (Stereo or SAP) regardless of the selected position.
For normal operation, the display should be in the STEREO position. The DVD+VCR will then record a STEREO program when available, and record a
mono program IF the program is NOT IN STEREO. For weak STEREO and/or SAP broadcasts, changing the display to mono may give clearer sound.
BROADCAST TYPE can be switched among STEREO, SAP, and MONO by pressing b/B. AUDIO OUTPUT (STEREO/LEFT/RIGHT) Used during playback
[when AUDIO MODE (HI-FI/NORMAL) is in HI-FI position] for selecting the audio output signals from the AUDIO OUT terminals (L ch and R ch), and
RF.OUT. This display setting should normally be left in the stereo position, so that when a stereo tape is played, the stereo sound will be heard through the
left and right channels. If a mono tape is played and the audio output is set to stereo, the same mono sound will be heard from both left and right channels.
AUDIO OUTPUT can be switched among STEREO, LEFT, and RIGHT by pressing b/B. 6 Press MENU to return to the TV screen.
vV V CHANNEL (v/V) on 7 Use CH/TRKto(v/V) orthe DVD+VCRvthroughthe front panel cycle the channels in memory. TO ADD OR ERASE CHANNELS
FROM MEMORY This feature allows you to add or erase channels from memory manually. 1 Press V to choose the CH. ADD/DEL option on the TUNING
menu. Press b/B to select a channel to add or erase. Press SELECT/ENTER to add or erase the channel. Repeat steps 1 and 2 to add or erase channels. Press
MENU to return to the TV screen. 4 Press MENU when finished. 2 3 15 Before Operation - VCR Part (Continued) Setting the Clock The DVD+VCR gives you
The Auto Clock Feature enables the DVD+VCR to set up the clock when the DVD+VCR is turned off. Note There are cases where the TV station does not
send or sends wrong date and/or time information and the DVD+VCR sets the incorrect time. If this happens we recommend that you set the clock manually.
Things to know before starting The clock uses the 12-hour system. (Be sure to set AM and PM correctly.
) The initial Clock Setting is JANUARY 1, 2003, 12:00 AM. Manual Clock Set Example: JULY 5, 2003 ; 2:15 AM Auto Clock Set The Auto Clock Set feature is
set to ON at the factory. In the ON setting, the DVD+VCR looks for a channel carrying XDS (Extended Data Services) information. XDS updates the clock
v/V to choose V 2 Press SELECT/ENTERthe CLOCK menu.menu Press and the CLOCK will appear. The Auto Clock Feature enables the DVD+VCR to set up
the clock when the DVD+VCR is turned off. 1 Press MENU and the MAIN menu will appear. v/V to choose V 2 Press SELECT/ENTERthe CLOCK
menu.menu Press and the CLOCK will appear. B 3 Press b/B to choose the month. V 4 Press /B to choose the DAY option. Use b B to choose the day. The day
to choose the AUTO 3 Press V /B to choose ON. CLOCK SET option. Press b B The Auto Clock Set feature is set to ON at the factory. In the ON setting, the
DVD+VCR looks for a channel carrying XDS (Extended Data Services) information. XDS updates the clock using the Coordinated Universal Time. V 5 Press
/B to choose the YEAR option. Use b B to choose the year. V 6 Press /B to choose the TIME option. Use b B to choose the time. Press and hold b/B to advance
7 Press item. Press E F to choose the DAYLIGHT SAVINGS or G to choose AUTO, ON or OFF. 4 Press item. Press E F to choose the DAYLIGHT SAVINGS
or G to choose AUTO, ON or OFF. If you choose AUTO, the VCR sets the clock using the DST information broadcast in the signal (channel).
two ways to set the time and date: the Auto Clock Feature or manually.
using the Coordinated Universal Time. 1 Press MENU and the MAIN menu will appear.
of the week will display automatically.
You're reading an excerpt. Click here to read official SANYO
DVC-2600 user guide
http://somemanuals.com/dref/81636
clock continuously.
Advertisement
