Wireless Lan (H5500 Only) - HP IPAQ H5100 User Manual

Wireless LAN (h5500 only)

For more information on Wireless LAN, refer to Chapter 9,
"Using the Wireless LAN."
Problem
I cannot connect • Be sure the WLAN is on.
to an access
• Be sure the device identified the network you want to
point.
• Be sure you provided any necessary authentication keys
• Be sure your iPAQ Pocket PC is within range of the
I am connected If the wireless network you are connected to connects to
to an access Work, the network may require a proxy. To set up the proxy:
point, but I
1. Ask your network administrator for the proxy settings.
cannot browse
2. Tap the Connections icon > Add Proxy Server.
the Internet.
3. Refer to "Setting Up Proxy Server Settings" in Chapter 9
I do not see my Your wireless network could be a non-broadcasting network.
wireless network
1. Tap the Connections icon > Settings.
on my iPAQ
2. Tap the Advanced tab > Network Cards > Add
Pocket PC.
3. Follow the instructions on the screen.
I cannot turn • Be sure you have enough battery charge. If the battery is
the Wireless
LAN on.
• Reset the device by using the stylus to lightly press the
User's Guide
Solution
connect to.
if prompted by the system.
access point.
for more information.
New Settings.
low, your iPAQ Pocket PC will not turn on the WLAN in
order to conserve power.
Reset button on the bottom of the unit.
Troubleshooting
11–9