Advertisement
Remote Printer Console Menu Table
Main menu
Sub menu
Custom
MP First
Sleep Mode
Sleep Indication
Toner Low Indication
Printer Language
Reprint Mask
Thick Font
IP Conifg
APIPA
Net Memory Level
Advanced Command
Options
off, on
on, off
off, Dimmed
Normal, Delay, off
English, French, German,
Dutch, Spanish, Italian,
Finnish, Norwegian,
Swedish, Portuguese, Danish
off, on
off, on
AUTO, DHCP, BOOTP,
RARP, STATIC
Enable, Disable
1 to 15
-
Descriptions
Selects whether to feed paper from the
Multi-purpose (MP) tray as a priority.
This function is available only for models
which have the MP tray.
Turns the sleep mode ON or OFF.
Selects whether the LED is to go off or be
dimmed when the printer is in sleep mode.
You need to select Delay if you want the
Toner Low LED indication to appear when
the toner amount becomes lower than the
default Normal setting.
Selects the language you want to use.
The printer driver setting overrides the
Remote Printer Console setting. If you once
send the data to printer using the printer
driver, the printer's language setting will be
changed.
If you want to disable the Reprint function,
select on. This setting overrides the printer
driver Reprint setting.
If you select on, Brougham font will be
replaced by bold Brougham font.
Selects a method to configure IP address.
This function is available only for the
network-ready model.
Turns the APIPA function enable or disable.
This function is available only for the
network-ready model.
Selects the capacity of memory which is
used for network function.
This function is available only for the
network-ready model with Upnp support.
This function is used for specific service
functions.
3
3 - 5
Advertisement
