Selecting Recording Devices; Resolving Sound Issues - HP PC Getting Started Manual

44
Getting Started Guide

Selecting Recording Devices

(Type 6 connectors only)
To select a sound recording device:
1 Click Start on the taskbar.
2 Choose Control Panel.
3 Click Sounds and Audio Devices (or Sounds, Speech, and Audio
Devices). The Sounds and Audio Devices window opens.
4 Click the Audio tab. The window opens.
5 In Sound Recording, select a recording device.
6 Click OK.
7 Close the window.

Resolving Sound Issues

If you don't have sound from your speakers, check the following:
• Check volume and mute settings.
• Use active, powered speakers, or speakers with an amplifier.
• Verify cable connections.
• Make sure the software program and sound software are configured.
• Some programs may result in low volume, even when the Volume knob is turned
to the maximum position. If this is the case, double-click the Volume icon on
the taskbar, and increase the volume.
• Reconfigure the sound software for surround sound.
• Reinstall the sound card drivers by using HP or Compaq Application Recovery.
See "Application Recovery" in the PC Troubleshooting and Maintenance
Guide.