Battery Installation - Craftsman 82005 Owner's Manual

BATTERY INSTALLATION

BATTERY INSTALLATION
WARNING: To avoid electric shock, disconnect the test
leads from any source of voltage before removing the battery
cover.
1. Turn power off and disconnect the test leads from the
meter.
2. Open the rear battery cover by removing two screws (B)
using a Phillips head screwdriver.
3. Insert the battery into battery holder, observing the correct
polarity.
4. Put the battery cover back in place. Secure with the
screws.
WARNING: To avoid electric shock, do not operate the
meter until the battery cover is in place and fastened
securely.
NOTE: If your meter does not work properly, check the fuses
and batteries to make sure that they are still good and
that they are properly inserted.
9