System - D-Link DHP-W311AV User Manual

Section 3 - Configuration
The System section allows you both save and delete settings on your DHP-W310AV.
Save Settings To Click Save by Save Settings to Local Hard
Local Hard Drive: Drive to keep the current DHP-W310AV
configuration in a file on your computer. You
can select a location and file name for your
settings.
Load Settings From Click Choose File to find a previously saved
Local Hard Drive: DHP-W310AV configuration file. Then, click
the Upload Settings button to transfer those
settings to the DHP-W310AV.
Restore to This option restores all configuration settings
Factory Default back to the settings that were in effect at the
Settings: time the DHP-W310AV was shipped from the
factory. Any settings that have not been saved will be lost, including any rules that you have created. If you would like to
save the current DHP-W310AV configuration settings, use the Save button to Save Settings to your local hard drive before
you Restore to Factory Default Settings.
Reboot the Click to Reboot the Device.
Device:
Clear Language Click to Clear any language pack that is currently installed. For more about language packs, refer to
Pack:
D-Link DHP-W311AV User Manual

System

"Firmware" on page 27.
26