Electrical Specifications; Power Requirements; Line Cord Set - HP 650C User Manual

ELECTRICAL SPECIFICATIONS

POWER REQUIREMENTS

HP C2858A and C2859A DesignJet 650C plotters have self-adjusting power supplies and do
not require voltage selector or switch settings prior to use. Table 2-1 lists the power require-
ments for the plotters.
Voltage Requirements
Frequency
Consumption

LINE CORD SET

W A R N I N G
The configuration of the ac line cord set required for use with the plotters is determined by the
country of destination for the plotters. Refer to Chapter 3 for a listing of the available ac line
cord connectors.
2-2 Site Planning and Requirements
Table 2-1. Power Requirements
Source
Voltage Current (max)
100 Vac 1.4 A
120 Vac 1.2 A
220 Vac 650 mA
240 Vac 600 mA
47-53 Hz and 57-63 Hz
140 Watts maximum