Epson EU-42 Setup Manual page 17

7. Attach cable clips to the cabinet as needed. Holes are provided
for this purpose in various positions around the cabinet.
w
Warning:
Do not climb onto the cabinet. Doing so may result in injury,
or may damage the cabinet.
c
Caution:
This cabinet is designed for use exclusively with the EPSON
AcuLaser Color Copy Station 8500, EPSON AcuLaser
C8500/GT-10000+ or EPSON EXPRESSION 1640XL copy
system. Do not use it with any other devices.
Installing the Control Panel
Follow the instructions below to install the control panel. As the
surface of the panel is easily damaged, prepare a soft cloth on
which to lay the panel during the installation procedure.
Note:
The control panel can be used independently from the cabinet. If you do
not plan to install the panel in the cabinet, attach the rubber feet to the
the bottom of the control panel as shown, then follow the instructions
below to connect the cable and to attach the panel cover.
Setting Up the Cabinet
11