Additional Specific Safety Rules - DeWalt 513 Instruction Manual

ADDITIONAL SPECIFIC SAFETY RULES

1. Hold tool by insulated gripping surfaces when performing an operation
where the cutting tools may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal parts of the tool "live"
and shock the operator.
2.
IN LOCK MORTISER CARRIAGE.
3. Be sure cord is free and will not "hang up" during operations.
4. Keep hands clear of cutter when motor is running to prevent personal
injury.
5. Stay alert and keep cutter clear of all foreign objects while motor is
running.
6. Be sure motor has completely stopped before withdrawing cutter from
machined mortise.
Accessories must be rated for at least the speed recommended on
7.
the tool warning label. Wheels and other accessories running over
rated speed can fly apart and cause injury.
8. Wear eye and hearing protection. Always use safety glasses. Everyday
eyeglasses are NOT safety glasses. USE CERTIFIED SAFETY
EQUIPMENT. Eye protection equipment should comply with ANSI Z87.1
standards. Hearing equipment should comply with ANSI S3.19 standards.
9.
other airborne particles, including wood dust, crystalline silica dust
and asbestos dust. Direct particles away from face and body. Always
operate tool in well ventilated area and provide for proper dust removal.
Use dust collection system wherever possible. Exposure to the dust may
cause serious and permanent respiratory or other injury, including silicosis
(a serious lung disease), cancer, and death. Avoid breathing the dust, and
avoid prolonged contact with dust. Allowing dust to get into your mouth or
eyes, or lay on your skin may promote absorption of harmful material.
Always use properly fitting NIOSH/OSHA approved respiratory protection
appropriate for the dust exposure, and wash exposed areas with soap and
water.
SYMBOL
V ........................ volts
A ........................ amperes
Hz ........................ hertz
W ........................ watts
kW ........................ kilowatts
F ........................ farads
µF ........................ microfarads
l ........................ litres
g ........................ grams
kg ........................ kilograms
bar ........................ bars
Pa ........................ pascals
h ........................ hours
min ........................ minutes
s ........................ seconds
n ........................ no-load speed
0
.../min or ...min -
or d.c. ................ direct current
or a.c. ................ alternating current
DO NOT OPERATE MOTOR UNIT UNLESS MOUNTED
Use of this tool can generate and disburse dust or
DEFINITION
1 ......... Revolutions or reciprocations per minute
SAVE THESE INSTRUCTIONS!
6