To Enable/Disable Rtp Alarm - NEC DT750 User Manual

[Incoming Call]
1
Ring Volume
2
Offhook Ring
3
Headset Ring
4
Ring Tone
5
Illumination
6
Headset Ring Volume
1
6. Select External Call when setting the
illumination pattern for external calls. Select
2
Internal Call when setting the illumination
pattern for internal call. Then, press
or OK softkey.
[Illumination]
1
External Call
2
Internal Call
3
IM
↓
7. Select a desired illumination pattern.
Then press (Enter) or OK softkey to store the
setting.
1/1
OK
Back
(Enter)
1/1
Back OK
[External Call]
Automatic
0
1
Disable
2
Red
3
Green
4
Blue
5
Yellow
6
Purple
7
Light Blue
The default setting is 0 Automatic.
The currently enabled item is highlighted.
8. The display returns to the Illumination screen.
Continue programming or press Exit for default
display.

To Enable/Disable RTP Alarm

The procedure below shows how to enable/disable
RTP alarm.
1. While indicating the current time on LCD, press
key to open the Menu screen.
Menu
2. Select Setting and then press
OK softkey (or press
26
1/2
Back OK
↓
(Enter) or
key).
5