Table of Contents
Advertisement
WIRELESS LAN SET Settings
Description of WIRELESS LAN
SET Screen
1
CURRENT CHANNEL
The transmission mode (frequency channel) that
was set for the wireless LAN device (access
point) will be displayed here automatically.
2
ESS ID (Extended Service Set-Identifier)
This is a verification code for transmissions sent
over the wireless LAN from the video server to
the wireless LAN device.
3
WEP ENCIPHERMENT (Default setting:
DISABLE)
This is a security function that encrypts the data
being transmitted so that it cannot be intercepted
by an unauthorized third party.
Available settings:
•
DISABLE: Encipherment is not used.
•
WEP40: The encryption key uses 40 bit
(64 bit) data.
•
WEP128: The encryption key uses 128 bit
data.
128 bit encipherment provides a higher level
*
of security.
WEP: Wired Equivalent Privacy
*
4
ENCRYPTION KEY
Up to four types of encryption key can be set.
Rules for encryption key entry:
•
WEP40: The encryption key can consist of
up to 5 alphanumeric characters.
•
WEP128: The encryption key can consist of
up to 13 alphanumeric characters.
English
Encipherment Settings
If you do not type in the same encryption key
that has been set for the wireless LAN device,
communication will not be possible. Make a note
of the encryption key and type it in.
Example: Encryption key 1: 1234567890000
Encryption key 2: 12345
1
Encryption key 3: ABCDE12345678
2
Encryption key 4: ABCDE
3
1
If using encryption key 1 (or 3), select
4
"WEP128" from the drop-down list box.
2
Click encryption key "1".
3
If using encryption key 2 (or 4), select
"WEP40" from the drop-down list box.
4
Click encryption key "2".
5
Click the [SET] button.
ESS ID and the encryption key for the video
server and the wireless LAN device will be
verified.
Note:
•
If you are not using encipherment, set "WEP
ENCIPHERMENT" to "DISABLE".
•
If you do not type in an encryption key, the
encryption key numbers cannot be selected.
– 47 –
Advertisement
Table of Contents
