Viewing The Connections - Side Connectors; Power Connection; Aerial Connection - Silvercrest 32111 User Manual

Viewing the Connections - Side Connectors

1. CI Slot is used for inserting a CI card. A CI card allows you to view
all the channels that you subscribe to. For more information, see
"Conditional Access" section.
2. Side USB inputs.
3. Side HDMI Input is for connecting a device that has an HDMI
socket.
4. Headphone jack is used for connecting an external headphone to
the system. Connect to the HEADPHONE jack to listen to the TV
from headphones (optional).
5. Video Input is used for connecting video signals of external
devices.Connect the video cable between the VIDEO IN
socket on the TV and the VIDEO OUT jack on your device.
6. Audio Inputs are used for connecting audio signals of external
devices. Connect the audio cable between the AUDIO INPUTS
on the TV and the AUDIO OUTPUT jacks on your device.
Note: If you connect a device to the TV via the VIDEO
INPUT, you should also connect your device with an audio
cable to the AUDIO INPUTS of the TV to enable audio.
7. The Power-switch is used for turning the TV "Off" or into "Standby-
Mode".

Power Connection

IMPORTANT :The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains. Plug the power cable to the mains socket outlet.

Aerial Connection

• Connect the aerial ,cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
English - 6 -