Memory Full; Changing The Battery - GE 28203 User Manual

Memory Full

When answering system memory is full, the system answers after
15th ring, and beeps to prompt you to enter the -digit security code.
If you don't enter the security code within 8 seconds, the phone
hangs up.
You should erase some messages so the answering system can
record new messages.
NOTE: The unit also answers after the 15th ring if it is
turned off. To access the answering system, enter your
3-digit security code.

Changing the Battery

CAUTION: To reduce the risk of fire or personal
injury, use only the Thomson Inc. approved Model
5-2840 Nickel-metal Hydride battery (Ni-MH),
which is compatible with this unit.
1. Make sure the telephone is OFF (not in TALK mode) before you
replace battery.
. Remove the battery compartment door.
. Disconnect the cord attached to the battery pack and remove the
battery pack from the handset.
. Insert the new battery pack and connect the cord to the jack
inside the battery compartment.
5. Put the battery compartment door back on.
6. Place handset in the base to charge. Allow the handset battery
to properly charge (for 16 hours) prior to first use or when you
install a new battery pack. If you do not properly charge the
phone, battery performance will be compromised.
5