Telephone Blocking; Handset Telephone Lock - Siemens HiPath 3000 Operating Manual

Step by Step
F G
H/Set Set-
tings
D E
Handset
D E
Change HSPIN

Telephone blocking

Handset telephone lock

You can protect your handset against unauthorised
access by entering a 4-digit numerical code to lock it.
The PIN is preset to "0000" (default). The handset does
not prompt for a PIN in this setting. As soon as you have
changed the PIN you will need to enter it when you turn
on the handset.
Enter the value "0000" again to deactivate the PIN.
Entering a new PIN
© G
Open the handset's main menu.
or
[
Select the menu item and confirm.
[
Select the menu item and confirm.
[
Select the menu item and confirm.
o
Enter the old PIN. If a PIN has not yet been set, then
enter "0000".
o
Enter the new PIN.
D
Move the cursor down one line.
o
Repeat the new PIN.
[
Confirm your entries.
a Press the On-hook key to end the process.
Battery charging when PIN lock active
If the handset has deactivated because the batteries
are flat, it automatically activates when you place it in
the charging shell. The charging operation starts. If you
have already set a PIN, you must enter it so that the
handset can receive calls.
Attention:
If you have forgotten your PIN, please contact
Siemens Service. The PIN will be reset at your
own expense.
Telephone blocking
99