Advertisement
Changing the display
mode and settings
Press DISPLAY.
The display changes as follows:
... When you tune in a station by selecting a preset
number.
To change the display mode
o
Field strength level indicator
e
Preset
number~
e
Band
e
Frequency
e
Current time
When an analog radio station is received
Note
The display item differs depending on the content of a
broadcast or the station.
When an analog
FM
broadcast that supports RBDS
(Radio Broadcast Data System) Is received
... When you tune in a station by selecting a preset
number.
o
Field strength level Indicator
CD
Preset number'"
e
Band
e
Station name
Naryle of station currently tuned in.
G
Frequency
G
Current time
CD
Text information
Text information transmitted from station.
To change the display to the
daylight.saving time (summer
time) indication
1 Press MENU to show the menu display.
2
Press SELECT
t
or .. to select "DST;' then
press ENTER.
3
Press SELECT
t
or .. to select "ON;' then
press ENTER.
"*-,,
appears and the time indication changes to
summer time.
To deactivate the DST function, select "OFF" in step 3.
Tip
The preset can be selected by pressing the number button
of the remote commander. Press ENTER after the preset
number is selected.
Playing the radio
Note
If you try to store another station in the same preset
number. the previously stored station will be replaced.
To preset another station, repeat these steps.
-Manual tuning
1 Press
lIe.!.>
to turn on the radio.
2 Press BAND to select the band AM or FM.
3
Press TUNE
+
or - to tune in to a desired
frequency.
Note
The frequency cannot be input with the number buttons
of the remote commander.
Tuning in to a station
1 Press
1/c.9 to turn on the radio.
2
Press BAND to select the band AM or FM.
3
Press PRESET
+
or - to select the desired
preset number.
r.d
1m
EI1"\BR/ PRE:;ET
~1O.
PC: 1]:::
98.
1t'lHz
1-,-,
-Preset tuning
You can preset 20 stations each for AM and FM.
Presetting a station
1 Follow steps
1
to 3 in "Manual tuning" to tune
the frequency you wish to preset.
2 Press and hold ENTER for a few seconds.
The display changes as follow:
3
Press PRESET
+
or - to select the preset
number, then press ENTER.
The frequency is stored in the selected preset
number.
4
Press SELECT
t
or .. until current hour
appears in the display, then press ENTER.
TIle hour is set and the minutes start to flash.
5
Repeat step 4 to set the minute.
Note
If you do not set the menu within 65 seconds, the setting
mode is canceled.
-Scan tuning
The unit will automatically scan the selected band.
In HD scan, HD Radio stations are scanned.
1 Press
lIe.!.>
to turn on the radio.
2
Press BAND to select the band AM or FM.
3
Press SCAN or HD SCAN on the unit or
remote commander.
Scanning of the selected band starts.
When a station is received, scanning pauses for 3
seconds and then continues.
4
When the unit tunes in to the desired station,
do any of the following operations to stop
scanning.
- Press ENTER on the unit or remote commander.
- Press SCAN or HD SCAN.
S
If necessary, press TUNE
+
or - to tune in to
the station more precisely.
I/tJ
o
G)®@
0®®
0®®
@8
@
o
t
~c:>
SELECT
SCAN
~c:>
SLEEP
c:>
MENU
BRIGHT
DISPLAY
c:> c:> c:>
<t1EI1U>
mw"":l'F
CI'~:R;
The number S and the PRESET
+
buttons have a tactile dot.
Plug in the unit.
The display will flash "AM 12:00:'
2 Press MENU to show the menu display.
Setting the clock
B
BJS
'Y.II
to
rJiljJ
1m
SLEEP
"*
Installing the batteries into the remote com-
mander (See Fig.
(EJI
Insert two size AAA (R03) batteries (not supplied).
Size AAA (R031
x2
•
•
Preparing the remote
commander
When to replace the batteries
With normal use, the batteries should last (or about
six months. When the remote commander no longer
operates the unit, replace all the batteries with new ones.
Notes
• Do not charge dry batteries.
• When you arc not going to use the remote commander
for a long time. remove the batteries to avoid any
damage caused by leakage and corrosion.
3
Press SELECT
t
or .. to select "TIME SET;'
then press ENTER.
The hour
will
start to flash in the display.
Advertisement
