HP ProBook 4310s Maintenance And Service Manual page 107

Computer Setup
Select
System Configuration menu (continued)
Device Configurations (continued)
Built-In Device Options
Port Options (all are enabled by default)
Set Security Level
Restore Security Defaults
5–6
To do this
■ SATA (Serial Advanced Technology Attachment)
device mode. The following options are available:
❐ AHCI (Advanced Host Controller Interface)
❐ IDE (Integrated Drive Electronics)
❐ RAID (select models only)
✎
Availability of the preceding options varies by
computer model.
■ Enable/disable HP QuickLock 2 (enabled by default).
■ Enable/disable Virtualization Technology (disabled
by default).
■ Enable/disable Dual Core CPU (select models only;
enabled by default).
■ Enable/disable Unified Extensible Firmware Interface
(UEFI) boot mode (disabled by default).
■ Enable/disable the wireless button state
(enabled by default).
■ Enable/disable the embedded WLAN device (enabled
by default).
■ Enable/disable embedded Bluetooth device radio
(enabled by default).
■ Enable/disable the Network Interface Controller (LAN)
(enabled by default).
■ Enable/disable LAN/WLAN switching (disabled by default).
■ Set the wake on LAN state. Options include the following:
❐ Disabled
❐ Boot to Network (set by default)
❐ Follow Boot Order
■ Enable/disable the optical disc drive (select models only;
enabled by default).
■ Enable/disable the fingerprint device (select models only;
enabled by default).
■ Enable/disable the integrated camera (enabled by default).
■ Enable/disable a modem device (enabled by default).
■ Enable/disable the microphone (enabled by default).
✎
All port options are enabled by default.
■ Enable/disable the flash media reader.
■ Enable/disable the USB port.
Ä
Disabling the USB port also disables MultiBay
devices and ExpressCard devices on the
advanced port replicator.
■ Enable/disable the ExpressCard slot.
Change, view, or hide security levels for all BIOS menu items.
Restore the default security settings.
Maintenance and Service Guide