Drive Settings - Epson PP-100II User Manual

Batch Mode
This mode uses stacker 1 and 2 as the input stackers, and stacker 2 and 3 as the output
stackers.
You can create up to 100 CDs/DVDs/BDs at once without refilling and taking out discs
while publishing. Up to 1000 CDs/DVDs/BDs can be continuously published in a single job
by refilling discs and taking out published discs. To use this mode, you need to place
stacker 3 into the product.
& See "Batch Mode" on page 59.
Read Back Mode
This mode uses stacker 1 as the input stacker, and stacker 2 as the output stacker.
Data in up to 50 CDs/DVDs/BDs in stacker 1 can be read at once. You can store the data
in your local/network HDD as files or a disc image file.
& See "Read Back Mode" on page 73.

Drive Settings

Drive to be used
Select Drive to Use from the following.
Use Both
Use both drive 1 and 2 to write/read data. Jobs will be efficiently processed by using 2
drives. If trouble occurrs on either drive and it cannot write data, other drive will be used
automatically.
Use Drive 1 Only
Use only drive 1.
Use Drive 2 Only
Use only drive 2.
Number of write retries (except for Read Back mode)
Select 0 to 9 for the Number of write retries.
26
Publishing Discs