Motorola APX 6000 User Manual page 3

®
ASTRO APX™ 6000/APX 6000Li
Series
Digital Portable Radios
Quick Reference Card
RF ENERGY EXPOSURE AND PRODUCT SAFETY
GUIDE FOR PORTABLE TWO-WAY RADIOS
Before using this product, read the operating instructions
!
for safe usage contained in the Product Safety and RF
a u t i o n
Exposure booklet enclosed with your radio.
ATTENTION!
This radio is restricted to occupational use only to satisfy
FCC RF energy exposure requirements. Before using this
product, read the guide enclosed with your radio which contains
important operating instructions for safe usage and RF energy
awareness and control for compliance with applicable standards
and regulations.
Radio Controls
Top (Orange)
Button
__________
Microphone
Accessory
Connector
Main Display
Home Button
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All
other trademarks are the property of their respective owners. © 2011–2012 by Motorola Solutions, Inc. All Rights Reserved. 10/12
1303 East Algonquin Road, Schaumburg,Illinois 60196, U.S.A.
16-Position
Select Knob
__________
On/Off/Volume
Control Knob
Top Side
(Select)
Button
__________
PTT Button
Side Button 1
__________
3-Position A/B/C
Switch
__________
Side Button 2
__________
2-Position
Concentric
Switch
__________
Radio On/Off
• On – On/Off/Volume knob clockwise.
Menu Select • Off – On/Off/Volume knob counterclockwise.
Buttons
Zones and Channels
Data Feature
Button • Zone – Zone switch to desired zone.
• Channel – Channel switch to desired channel.
4-Way Navigation
Button
Receiving and Transmitting
Antenna
1
Select zone/channel.
2
Listen for a transmission.
OR
Top
Display Press and hold Volume Set button.
OR
Press Monitor button and listen for activity.
3
Adjust volume, if necessary.
Microphone
4
Press the PTT button to transmit; release to
receive.
Main
Speaker
Sending an Emergency Alarm
1
Press and hold the Emergency button*.
Bluetooth
Pairing
The display shows Emergency and the
2
Indicator
current zone/channel. You hear a short,
Battery
medium-pitched tone, and the LED blinks red
momentarily.
3
When acknowledgment is received, you hear
four beeps; alarm ends; and radio exits
emergency.
* Default emergency button press timer is set
to 1 second. This timer is programmable, see
page 53 in the user guide for details.
To exit emergency at any time, press and hold
the Emergency button.
*PMLN5716D*
PMLN5716D
English