Motorola GX2-PSAC10D-R Installation And Operation Manual page 3

Motorola gx2-psac10d-r power supply - installation and operation manual
Table of Contents

Advertisement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Installation
Manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his/her own expense.
Changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respects toutes les exigences du Règlement sur le matériel brouilleur du Canada.
We
declare under our sole responsibility that the
®
OmniStar
to which this declaration relates is in conformity with one or more of the following standards:
EMC Standards
EN55022
EN55024
IEC60065
Safety Standards
EN60065
EN60825
following the provisions of the Directive(s) of the Council of the European Union:
EMC Directive 89/336/EEC
WARNING
There is an energy hazard on this built-in power supply. During operation, the operator must not touch the
+12V output.
This unit contains a secondary output exceeding 240VA. When installing into the end system, care must be
taken not to touch the +12V output.
Copyright © 2007 by Motorola, Inc.
All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as
translation, transformation or adaptation) without written permission from Motorola, Inc.
Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola
to provide notification of such revision or change. Motorola provides this guide without warranty of any kind, either implied or expressed,
including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Motorola may make improvements or
changes in the product(s) described in this manual at any time.
MOTOROLA, the Stylized M Logo, and OmniStar are registered in the US Patent & Trademark Office. All other product or service names are
the property of their respective owners. © Motorola, Inc. 2007
FCC Compliance
Canadian Compliance
International Declaration of Conformity
Motorola, Inc.
101 Tournament Drive
Horsham, PA 19044, U.S.A.
Model GX2-PSAC10D-R
EN55013
EN50083-2
EN50083-1
EN60950
Low Voltage Directive 73/23/EEC
CISPR-22
CISPR-24
IEC 60950 + A1: 1992 + A2: 1993 + A3: 1995 + A4: 1996
CISPR-13

Advertisement

Table of Contents
loading

Table of Contents