Changing The Time/Date; Interrupt A Call (Tone Override); Barge In (Interrupt A Call); Room Monitor - NEC SL1100 User Manual

*CHANGING THE TIME/DATE

INTERRUPT A CALL
(Tone override)
BARGE IN (INTERRUPT A

ROOM MONITOR

V1
The programmed time displays
Press EXIT
To cancel an alarm:
Press Speaker
Dial 727
Dial alarm type 1 or 2
Dial 9999
Press Speaker to hang up
Press Menu softbutton
Press Next to find ADMIN
Press SELECT (time displays, use NEXT for Date)
Press SELECT
Change Time / Date as required
Press SAVE softbutton
Press EXIT button
* Note - Will not work if called station has CFW B/N activated
To send signals to an extension busy on a call:
Dial Extension that is busy
press # When you hear the busy tone
(The called extension hears call alert notification, press the
hold button and both parties are connected.)
CALL)* Note - Must
be activated in programming
Lift Handset
Dial 710
Dial Busy Extension
Room monitor lets an extension listen to the sounds in co-workers area, for
example, a receptionist could listen for sounds in the warehouse when it's
left unattended.
NOTE:
(A Room monitor button must be programmed. Room monitor must be
activated at the extension initiating the monitor and at the extension that is to be
monitored. You can only listen to one extension at a time.)
To activate Room Monitor from initiating extension:
Press Room Monitor button
Dial Extension number you are at
(You can place and answer calls whilst monitor is active)
To activate Room Monitor from extension to be monitored:
Press Room Monitor button
Dial Extension number you are at
(The extension user will hear a warning tone).
8