Time And Date - NEC univerge sv8100 User Manual

Description
Since InMail is completely integrated with the telephone system software, the InMail
time and date is the same as the phone system time and date. Since time and date is
used on telephone displays and with the Auto Time Stamp and Time and Date Stamp
features, be sure to set it accurately. To change the time and date, use the system
programmable options. See Programming below. The Time and Date is retained if the
telephone system power should fail or the system resets.
In addition, a Subscriber Mailbox user can hear the time and date when they call their
mailbox.
Related Features
Auto Time Stamp
Time and Date Stamp
Programming
1.
2.
InMail System Guide
After a user listens to a message, InMail can optionally announce the time and date the
message was left.
An extension can listen to a message and dial TI to hear the time the message was sent.
To set the system time and date from system programming:
10-01-01

Time and Date

Set the system Time and Date.
To set the system time from a system telephone:
Press Speaker key.
Dial .
828
Dial two digits for the hour (24 hour clock, 13 = 1:00 PM).
Dial two digits for the minutes (00-60).
Press Speaker to hang up.
Issue 7.00
Time and Date
2 - 347