NEC univerge sv8100 User Manual page 89

Programming
InMail System Guide
13-04-01 Speed Dialling Data
This program stores speed dial data into the speed dial areas and defines
the speed dial names.
Enter the CLI number of the device to be used for Automatic Access to VM
by Caller ID.
Entries
1~9, 0, ?, #, Pause (Press line key 1) Recall/Flash (Press line key 2) @ =
Code to wait for answer supervision in ISDN (Press line key 3)
(maximum 24 digits)
(default not assigned)
13-04-02 Name
Assign a name to each speed dial bin.
Entries
Maximum 12 characters
(Default not assigned)
13-04-11 Automatic Access to Voice Mail by Caller ID
Per Speed Dial Bin number (0000~1999), set the VM Box number
(001~512).
Incoming Caller ID number will be checked against Speed Dial data
(Program 13-04-01).
From matched Speed Dial Bin number, system then finds the associated
VM Box number with this program.
15-22-01 Mobile Extension Target Setup
For each Mobile Extension number, select the Abbreviated
Dial bin number to be associated with it.
When using this feature with Mobile Extension, set the associated VM Box
number in Program 13-04-11. The incoming Extension number will be
checked with Program15-22-01. From matched Speed Dial Bin No, system
finds the VM Box number with Program 13-04-11.
Entries
0~1999
(0 = No setting
1~1999 = target of
mobile extension)
(default = 0)
22-02-01 Incoming Call trunk Setup
Assign the incoming trunk type for each trunk.
Entries
Incoming Type for Day/ Night Mode (1~8):
Issue 7.00
2 - 81