NEC univerge sv8100 User Manual page 199

Programming
1.
2.
3.
4.
Operation
To log on to a Guest Mailbox:
1.
2.
To log on to a Guest Mailbox from the Automated Attendant:
1.
InMail System Guide
Set up a virtual extension for the Guest Mailbox.
11-04-01 Virtual Extension Numbering
Assign an unused extension number to an available virtual station port.
For example, assign extension 400 to virtual station port 1.
Activate an unused mailbox for the virtual extension.
47-02-01 Mailbox Active (Mailbox Active)
Enter 1 to activate a mailbox for the virtual station port.
Choose a mailbox that is not likely required for an installed extension (e.g.,
128).
Assign a mailbox number to the mailbox you activated for the virtual extension.
47-02-02 Mailbox Number (Mailbox Number)
The mailbox number you choose should be the same as the virtual
extension number (e.g., 400).
Be aware that mailboxes beginning with a leading digit of either 0, * and # are not
.
supported.
Refer to Subscriber Mailbox on page 2-337
Mailbox setup and operation.
Press the Speaker key + Dial the InMail master number (e.g., 555).
When InMail answers, dial the Guest Mailbox number.
Logging On to a Guest Mailbox from the Automated Attendant
After the Automated Attendant answers, dial # + The Guest Mailbox number.
This capability may be disabled in the Automated Attendant.
o
Your automated attendant may have GOTO or LOGON actions assigned to the Guest
o
Mailbox. Check with your Communications Manager.
Logging On to a Guest Mailbox
for additional details on Guest
Issue 7.00
2 - 191