NEC univerge sv8100 User Manual page 124

Issue 7.00
7.
8.
9.
10.
2 - 116
If the caller waits too long to dial, the Directory Dialing Message repeats.
By default, Directory Dialing callers have 5 seconds to dial letters.
.
Record a Directory Dialing Message.
See Operation on page
The Directory Dialing Message is the Instruction Menu for the Routing Mailbox
programmed as a Directory Dialing Mailbox.
By default (without a custom message recorded), the Directory Dialing Message is,
.
"Please enter one or more letters of the person's name, then press the pound key."
47-01-04 Non-Subscriber Message Length (Mbox Msg Length)
This option sets the maximum message length (1~4095 seconds) for
Instruction Menus.
By default, this option is 120 seconds.
.
Enable or disable the ability of the Directory Dialing Mailbox to detect and route
incoming faxes.
47-15-07 Fax Detection (Fax Detection)
Enter 1 to enable Fax Detection; 0 to disable. If enabled, when the Directory
Dialing Mailbox detects incoming fax CNG tone, it routes the call to the fax
extension specified in 47-01-06 Fax Extension.
See Fax Detection on page 2-151
By default, Fax Detection is disabled (N).
.
Enable the Directory Dialing Mailbox caller to dial 0 for other options or # to
return to the Automated Attendant.
47-15-08 Next Call Routing Mailbox (Next CR Mbox)
Assign a Next Call Routing Mailbox (1~32) to the Directory Dialing Mailbox.
To remove an assignment, press Hold.
Once assigned, dialing # returns to the Automated Attendant. Dialing 0
follows the 0 action of the Next Call Routing Mailbox.
By default, there is no Next Call Routing Mailbox assigned.
.
Enable Directory Dialing Mailbox to directly answer an outside call.
Make sure the active Answer Table uses the Call Routing Mailbox programmed
as a Directory Dialing Mailbox.
See Answer Tables on page 2-47
By default, Answer Table 1 routes to Routing Mailbox 000, which is a Call Routing
.
Mailbox.
2-121.
for more.
for more.
Features