NEC univerge sv8100 User Manual page 366

Issue 7.00
Programming
1.
2.
Operation
Not applicable
2 - 358
Assign the UTRF action to a key on the active Dial Action Table.
47-13-01 Dial Action Tables: UTRF Action - Unscreened Transfer (2) (UTRF)
Normally, the corresponding Number option should be XXX. Note that the
key you choose for this action is the first digit of the called extension
number.
For example, to allow callers to place Unscreened Transfers to extensions
200~299, for key 3 enter UTRF for the Action and XXX for the
corresponding Number.
To have Unscreened Transfer call a specific extension, the corresponding
Number option should be that extension's number. The caller then dials that
single digit to reach the extension.
For example, to have callers dial 8 to reach extension 303, for key 8 enter
UTRF for the Action and 303 for the corresponding Number.
By default, key 0 and TIMEOUT are both UTRF actions to 200. In addition, key 3
.
is an UTRF action to XXX.
Optionally set the telephone system's Transfer Recall interval.
24-02-04 Transfer Recall Time
Unanswered Unscreened Transfers route to the extension's mailbox after
this interval.
By default, this interval is 30 seconds.
.
Features