NEC univerge sv8100 User Manual page 417

Hide thumbs Also See for univerge sv8100:
Table of Contents

Advertisement

InMail System Guide
47-06-03
Auto Erase/Save of Messages (Auto Erase/Save)
Use this option to determine what happens when a Subscriber Mailbox user
completely listens to a new message and then exits their mailbox without
either saving (SA) or erasing (E) the message. Depending on the setting of
this option, InMail will either automatically save or erase the message. If the
mailbox user hangs up before listening to the entire new message, In-Mail
retains the message as a new message.
See
Auto Erase or Save on page 2-61
.
See
Routing Mailbox on page 2-321
.
See
Voice Mail Overflow on page 2-359
.
Options
(Erase)
0
After the subscriber listens to the entire new message and hangs up,
In-Mail erases the message.
(Save)
1
After the subscriber listens to the entire new message and hangs up,
In-Mail saves the message.
Default
(Save) (see above).
1
47-06-05
Recording Conversation Beep (Rec Conv Beep)
Use this option to enable or disable the Conversation Record beep. If
enabled, all parties on a call hear the voice prompt Recording followed by a
single beep when the extension user initiates Conversation Record. If
disabled, the voice prompt and beep do not occur. When you disable the
Conversation Record beep, the following voice prompts do not occur while
InMail records the conversation:
"Recording" (followed by a beep)
"That mailbox is full" (if the mailbox message storage capacity is reached)
"You have reached the recording limit" (if the recorded message is too long)
The SV8100 telephone system software provides an additional
Conversation Record beep. This beep repeats according to the setting of
Program 45-01-06 Voice Mail Integration Options: Record Alert Tone
Interval Time (0~64800 seconds). To disable the SV8100 telephone system
Conversation Record beep, enter 0 for this option.
See
Live Record on page 2-237
.
See
Routing Mailbox on page 2-321
.
See
Voice Mail Overflow on page 2-359
.
Options
1 (Yes - enabled)
0 (No - disabled)
Default
1 (Yes - enabled)
for more.
for more.
for more.
for more.
for more.
for more.
Issue 7.00
3 - 409

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents