NEC univerge sv8100 User Manual page 430

Issue 7.00
47-08 Routing Mailbox Call Routing Options
Description
Use 47-08 Routing Mailbox Call Routing Options to set the options for mailboxes
assigned as Call Routing Mailboxes in 47-07-02 Routing Mailbox Type.
.
Description
3 - 422
See Routing Mailbox for more.
47-08-01 Dial Action Table
Use this option to assign the Dial Action Table to the Call Routing Mailbox.
The Dial Action Table defines the dialing options for the call Routing
Mailbox.
See Routing Mailbox
.
Options
1~16 (Dial Action Table 1~16 (1~32 from v8.00 software))
Default
1 (Dial Action Table 1)
47-08-02 Screened Transfer Timeout (Scrn Trf Timeout)
Use this option to set how long a Screened Transfer (TRF) from the
Automated Attendant rings an unanswered extension before recalling.
This option has a similar function as Customize: Mailbox Options: Call Routing:
.
[Call Handling] Options: Delay Rings Before Redirect Transfer in InMail.
Options
0~255 seconds
Entering 0 causes immediate recall.
Default
15 seconds
47-08-03 Time Limit for Dialing Commands (Dialing Timeout)
This option determines how long InMail waits for an Automated Attendant
caller to dial before routing the call to the Timeout destination.
Be sure your Dial Action Tables have a Timeout action programmed.
.
See Routing Mailbox on page 2-321
.
If the caller waits too long to dial:
When the associated Dial Action Table has a Timeout action programmed,
the caller routes to that destination.
When the associated Dial Action Table does not have a Timeout action
and Dial Action Table for more.
and Dial Action Table on page 2-107 for more.
Programming