Rinse aid
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from
approx. 0-6 ml.
The factory default setting is 3 ml.
If the function to adjust the Sensor
wash programme has been activated,
the amount of rinse aid dispensed in
the
programme can be
Sensor wash
higher than that set.
If spots appear on crockery and
glassware:
– Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
– Decrease the rinse aid dosage.
Use the
sensors to set the rinse
+/-
aid dosage and confirm with
Consumption (EcoFeedback)
You can programme the dishwasher so
that the energy and water consumption
of the currently selected programme
appears in the display. The estimated
consumption can be displayed before
the programme starts and the actual
consumption can be displayed after the
programme has finished.
In this menu you can also call up the
total energy and water used in all
previous dishwasher programmes (see
"Caring for the environment,
EcoFeedback consumption indicator").
Consumption indicator
Select the
Select the setting you want and
confirm with
Total consumption
.
OK
You can display the values for
and
Water
Select the
You can also reset the values for the
total consumption to 0.
Select the
Select the
Confirm the message with
The values are now reset to 0.
Settings menu
Display consumption
.
OK
.
Total consumption
option.
Reset
option.
Yes
option.
Energy
option.
.
OK
87