Starting The Programme; Display - Miele HG05 Operating Instructions Manual

Starting the programme

 Press the Start sensor.
The programme starts, and the prompt
Crockery can be added

display.

As long as this prompt is showing,
crockery can be added without
compromising the wash results.

Water in the dishwasher may be
hot. Danger of scalding from water in
the cabinet.
Make sure you open the door very
carefully.
A programme should only be
cancelled in the first few minutes, if
at all. Otherwise important
programme stages could be omitted.
shows in the
Display
The estimated duration of the
programme selected appears in hours
and minutes in the display before the
programme begins. During the
programme, the time left until the end
of the programme is displayed.
Symbols appear to indicate which
stage the programme is at:
 Pre-wash / Soak
 Main wash
 Interim rinse
 Final rinse
 Drying
 Finish
The programme duration displayed may
vary with the same programme. It is
influenced by, among other things, the
water temperature at each intake, the
reactivation process, the type of
detergent, the amount of crockery and
how dirty it is.
When a programme is selected for the
first time, the display shows an average
duration for a cold water intake.
The durations shown in the Programme
chart refer to standard test loads and
temperatures.
Each time a programme is run, the
electronic unit takes the new conditions
into account, and calculates the
programme duration required.
Operation
45