Table of Contents
Advertisement
Operation
Starting the programme
Press the Start sensor.
The programme starts, and the prompt
Crockery can be added
play.
As long as this prompt is showing,
crockery can be added without com-
promising the wash results.
Water in the dishwasher may be
hot. Danger of scalding from water in
the cabinet.
Make sure you open the door very
carefully.
A programme should only be can-
celled in the first few minutes, if at
all. Otherwise important programme
stages could be omitted.
46
shows in the dis-
Time display
The estimated duration of the pro-
gramme selected appears the display
before the programme begins. During
the programme, the time left until the
end of the programme is displayed.
Symbols appear to indicate which stage
the programme is at:
Pre-wash / Soak
Main wash
Interim rinse
Final rinse
Drying
Finish
The programme duration displayed may
vary with the same programme. It is in-
fluenced by, among other things, the
water temperature at each intake, the
reactivation process, the water soften-
ing unit, the type of detergent, the
amount of crockery and how dirty it is.
When a programme is selected for the
first time, the display will show the aver-
age programme duration for a cold wa-
ter intake.
The durations shown in the Programme
chart refer to standard test loads and
temperatures.
Each time a programme is run, the elec-
tronic unit calculates the programme
duration required according to the tem-
perature of the water taken into the
dishwasher and the amount of crockery.
Advertisement
Table of Contents
