Miele HG05-W Operating Instructions Manual page 102

Settings menu
System settings
This function is reserved for the manual
integration of your appliance into your
network by a Miele service technician.
Module settings
We recommend connecting your dish-
washer to your WLAN network with the
help of the Miele@mobile App or via
WPS.
If you would rather set up the connec-
tion to your router yourself, or you have
a special network configuration, you
can enter the relevant settings using the
necessary technical knowledge.
102
Start module activity
If you wish to reset all entered settings
and values for Miele@home, you can re-
store the factory default settings on
your WLAN module. Any settings,
which do not affect Miele@home will re-
main unchanged.
 Select
Restart w. default settings
confirm with OK
Please wait... will appear in the display.
The message
Restart successful
pear in the display after a few minutes.
 Confirm the message with
The WLAN module factory default set-
tings have been restored.
If the factory default settings were not
restored to your WLAN module, repeat
the instructions above.
and
.
will ap-
.
OK