Table of Contents
Advertisement
Programme options
Delay start
There are three ways of starting the pro-
gramme by means of delaying the start.
You can set the start time or the finish
time of a programme. You also have the
option of taking advantage of time vari-
able economy rates of electricity using
the
EcoStart
or
SmartStart
When using the Delay start function,
make sure that the detergent com-
partment is dry before adding deter-
gent. Wipe dry with a cloth if neces-
sary. If the compartment is wet,
powder detergent can become
lumpy and stick to the dispenser,
with the result that it is not fully dis-
pensed.
Do not use liquid detergent when se-
lecting Delay start, as it can run into
the dishwasher before it is required.
To prevent children coming into
contact with dishwasher detergent:
add the detergent immediately be-
fore starting the programme, i.e. be-
fore activating delay start with
Then lock the door with the safety
lock.
52
function.
OK
.
Switch the dishwasher on using the
sensor.
Select the programme you want from
the main menu.
Select the
Delay start
programme menu for the selected
programme.
You then have a choice of the
and
Finish at
EcoStart
tions.
Select the function you want.
Now enter the time you want.
If, while you are setting the time, you do
not press any sensors for several
seconds, the display will revert to the
previous menu. You will then have to
enter your settings again.
If you keep the
+
the value shown will automatically in-
crease or decrease.
If the time of day display has been
switched off (see "Settings menu,
Time of day") the display will go out 10
minutes after activating the Delay start
function and only the Start indicator
light will flash slowly.
To switch the display back on for a
few minutes press the sensor.
option from the
Start at
or
func-
SmartStart
or
-
sensor pressed,
,
Advertisement
Table of Contents
