Selecting An Nd Filter; Setting The Sensitivity (Ei Value) (Cine Mode) - Sony F65 Operation Manual
Digital motion picture camera and upgrade kit
Hide thumbs
Also See for F65:
- Operation manual (112 pages) ,
- Operation manual (89 pages) ,
- Operation manual (102 pages)
Table of Contents
Advertisement
3-3-4 Selecting an ND Filter
The camera has built-in optical ND filters that can be used
to match the illumination and natural lighting conditions.
The following filters can be selected in F65RAW mode or
HD mode. In F65RAW-HFR mode, only [Clear] or [Close]
can be selected for the ND filter.
Filter density
Description
Clear
No filter is used.
0.9
1/8 optical transmittance
1.2
1/16 optical transmittance
1.5
1/32 optical transmittance
1.8
1/64 optical transmittance
Close
Closes the filter.
1
Select the ND filter on settings page 1, and press the
MENU SEL/ENTER dial.
Settings page 1
2
Turn the MENU SEL/ENTER dial to select the ND
filter, then press the MENU SEL/ENTER dial.
To set using the VF menu
Set the ND Filter on the <Base Setting> page in the
Camera menu (page 54).
3-3-5 Setting the Sensitivity (EI
Value) (Cine Mode)
The sensitivity is determined by the EI value (Exposure
Index). The viewfinder and monitor image brightness
changes to match the EI value. But it has no affect on the
recorded image.
The camera supports the following sensitivity settings:
200EI, 250EI, 320EI, 400EI, 500EI, 640EI, 800EI,
1000EI, 1250EI, 1600EI, 2000EI, 2500EI, and 3200EI.
34
Basic Settings using the Subdisplay
1
Select the sensitivity on settings page 1, then press the
MENU SEL/ENTER dial.
Settings page 1
2
Turn the MENU SEL/ENTER dial to select the EI
value, then press the MENU SEL/ENTER dial.
To set using the VF menu
ND filter
Set the Exposure Index on the <Base Setting> page in the
Camera menu (page 54).
Latitude values
The latitude is automatically assigned one of the following
values, depending on the sensitivity setting.
Sensitivity (EI value)
200EI
250EI
320EI
400EI
500EI
640EI
800EI
1000EI
1250EI
1600EI
2000EI
2500EI
3200EI
The value is displayed in "xxEI" format and represents the
highlight latitude displayed as a lens aperture value (f-
stop) for key light from a gray chart with 18% reflectivity.
Sensitivity
Latitude
4.0E
4.4E
4.7E
5.0E
5.4E
5.7E
6.0E
6.4E
6.7E
7.0E
7.4E
7.7E
8.0E
Advertisement
Table of Contents
