Manual Rpn Correction Settings; Registering Rpns - Sony F65 Operation Manual

The image switches between high-key monitoring
(reduced gain), low-key monitoring (increased gain), and
normal settings each time the ASSIGN button is pressed.
When the image is set for high-key monitoring or low-key
monitoring, the following indicator appears in the
viewfinder.
Displays "High key" or "Low key"
3-8 Manual RPN
Correction Settings
In system version V4.0 and later, you can manually specify
and register RPN (Residual Point Noise) pixel coordinates
for compensation.
Notes
• This function is only available in F65RAW mode.
• Operations for this function must be performed on the
monitor on which SDI OUT2 is displayed. The
information will not be displayed properly on SDI
OUT1.

3-8-1 Registering RPNs

Select Registration in the <RPN> page of the VF menu,
and press the MENU SEL/ENTER dial to go to the
<Manual RPN> settings screen.
Correction functions will be assigned to the ASSIGN 1 to
4 buttons and the subdisplay will be dedicated to the
correction function while the <Manual RPN> settings
screen is displayed. These will return to normal after you
return to the <RPN> page.
Registered RPNs: Displays the number of registered
RPNs.
Operation: Switches between registering and deleting
pixel coordinates for correction. Select "Add" to
register coordinates, and "Delete" to delete registered
coordinates.
RPN Ch.: Select the channel (R, G, B) to which the RPN
you want to register belongs.
Menu Pos.: Select "Bottom" or "Top" as the VF menu's
display position to prevent overlap with RPN.
EI: Allows you to change the EI (exposure index) value
setting. The monitor output's gain will change when
you change the EI value. Specify a suitable gain if
necessary.
The following functions will be assigned to the ASSIGN
buttons in this mode. The configuration status of each
function will be displayed in the subdisplay.

Manual RPN Correction Settings

47