Internet Explorer Setting
Settings
How to Open the Setting Page
1.
Enter IP address of camera in the address bar of Internet Explorer.
2.
Enter the user name and password.
3.
The Built-in Viewer of the camera is displayed.
Memo:
● When IP address entry, see the "Instructions (IP Address Settings)."
● The [Security Information] screen appears before the top page display. Press the [OK] button to
proceed. To suppress this warning screen, correct the Internet Explorer settings as follows.
● Select [Tools] - [Internet Options] - [Security] - [Trusted sites].
● Then, select [Custom Level] and [Miscellaneous] and set [Display mixed content] to AEnableB.
Note:
● Do not reset the camera and do not turn the power supply Off immediately after you have changed
the settings. If done, your settings are lost and the camera may be returned to the factory defaults.
4.
Click [Details] of the Built-in Viewer.
● [Basic Setting1] page will be opened if accessed by user name AadminB. (A Page 12)
● [Basic Setting2] page will be opened if accessed by user name AoperatorB. (A Page 14)
● [Miscellaneous] page will be opened if accessed by user name AuserB. (A Page 75)
Click here.
11